Pressure Filtration > AHP-55 Series Liquid Phase Vessels

The AHP-55 Series Liquid Phase Vessels - Will not bulge, leak or rust apart. The top is made of heavy gauge domed steel and powder coated for durability. The interior has dual liners and a heavy domed internal bottom. Each has a built in 30 psi pressure relief valve with a 3/4 inch NPT connection, influent and effluent sample and pressure ports. Inlet and outlet on top. All canisters are pressure tested before shipping.
AHP-55 Installation and Operation Instructions

AHP-55 RC840 (Most popular) 10 gpm canister for non potable applications

AHP-55 VC1240 10 gpm for potable application.

AHP-55 Series Liquid Phase Vessels (Specifications)
Model	Max. PSI	Max. GPM	Media	Lbs. of Media	Size (55 gal.)	Mesh	Inlet / Outlet
AHP-55 LGAC 830	30	10	Activated Carbon	200	24" x 35"	8 x 30	2"
AHP-55 LGAC 1240	30	10	Activated Carbon	190	24" x 35"	12 x 40	2"
AHP-55 VGAC 480	30	10	Vapor Phase Carbon	200	24" x 35"	4 x 8	2"
AHP-55 V4 Pellets	30	36	Vapor Phase Carbon	200	24" x 35"	3mm, 4mm	2"
AHP-55 MCM-830P	30	27	OrganoClay	200-250	24" x 35"	8 x 30	2"

AHP-55 LGAC 830 Contains a granular activated carbon made especially for use in a liquid phase applications. Its particle size and pore structure has been specifically designed to provide the best adsorption of impurities from liquid steam with the least flow resistance and pressure drop. The resulting product is characterized by high internal surface area and contains a broad pore size distribution.

AHP-55 V4 Pellets Contains a pelletized activated carbon made especially for use in a vapor applications. Its particle size and pore structure have been specifically designed to provide the best adsorption of impurities from vapor steam with the least flow resistance.

AHP-55 MCM-830P a modified clay mineral designed for use as a filter media in process and wastewater treatment. The product effectively removes a wide range of hydrocarbons and trace amounts of heavy metals from water. Unlike competitive filter media, Ecologix OrganoClay - MCM-830P does not swell or blind when sorbing contaminants, so it need not be blended with anthracite filler.

Media Replacement is a snap. Simply contact Ecologix and we wil arrange to have the drum shipped to us for replacement media. We then ship the container with the new media back to the customer.....its that easy.

COD - OrganoClay to the rescue.PDF

Sample Pressure Kit - Each kit comes with two (2) 1/4" PVC valves, tees and pressure gauges (0-60 psi). Comes pre-assembled and threads directly into the por ts on the AHP-55 top. Makes it easy to check pressure drop across the carbon and to get convenient influent and effluent water samples.

Flow Rates and Part Numbers for Connection Kits
Configuration	Max GPM per setup	Part Number
Flow Control Valve		Valv1CK
1 in and out	10	AHP-55-CK-1x1
2 in series	10	AHP-55-CK-1x2
3 in series	10	AHP-55-CK-1x3
2 in parallel	20	AHP-55-CK-2x1
2 in parallel, 2 in series	20	AHP-55-CK-2x2
2 in parallel, 3 in series	20	AHP-55-CK-2x3

AB Gauges

AHP-55 Optional Connection Kit: Sold pre-assembled. Allows user to easily connect AHP-55's in series and in parallel. Connections are 1" female cam lock in and out. Allows easy switch of flow direction for occasional backwashing. (note: to prevent clogging, never backwash into another carbon filter in the train. This will only foul the following canister. Instead backwash into an empty drum and allow sediments to settle. Once settled, decant the clear liquid on top and dispose of the slurry below).Comes pre-assembled as shown. 1/4" PVC Valves, 0-60 psi gauges. Recommended for first time purchase of AHP-55 canister.
Part # AHP-55GS Kit

AHP 55 Pressure Drop