Air Treatment Systems / HITT-H Series Hood Air Treatment System

How the H-Series Systm Work

• Grease, vaporized oils and smoke are captured by the high velocity hood
• As the contaminated air enters the hood's self-contained filtration system it first passes through the pre-wet section to ensure the grease & oils are saturated with water to eliminate any potential build-up in the housing
• Grease & oil laden air travels up vertically though horizontal inpingement trays with a deep bed of water providing a 100% subbing action removing the condensate (grease, oils, fat) and a majority of the smoke & odors
• Clean air passes through a mist eliminator section and then through the duct to the remote mounted exhaust fan
• Collected pollutants are stored in the resevoir of the hood and are held in suspension by the non-foaming detergent while the water is re-circulated back through the system to filter again
• System automatically performs a periodic "skim down" to remove the collected pollutants and adds water as required providing continuous, uninterupted heavy-duty operation

HITT-H Available Options

• Remote mount fan packages & silencers
• Inline 95% D.P. after filter module
• Inline heavy-duty odor control module
• Start-up commissioning & on-site training
• Island hoods
• Additional sizes & configurations

HITT-H Series Standard Specifications

• ETL Listed
• Sizes range from 6' - 20' length hoods
• Airflow range from 1,800 - 8,000 CFM
• Hood and major filtration components are 304 SS
• PLC controls for fully automatic, trouble-free operation
• Includes circulation pump, fill & balancing valves, level sensors, main drain with overflow & emergency drains and detergent feeder/pump

Benefits of a Factory Packaged System

• Virturally no Maintenance - No nozzles, filters or media to plug or replace - self cleaning with programmed injection of non-foaming detergent or biocatalyst
• Provides constant pressure drop and resulting constant flow, essential for effective removal of contaminants from the work space
• Highest removal efficiency at lowest consumtion
• Generates unmatched gas-to-liquid contact which is essential for efficient removal of stream, vaporized oils and fats plus particulates
• Fully automatic operation with PLC controls - includes periodic "skim down" tp remove collected pollutants
• Easy to service and maintain with all components accessible in kitchen
• Capable of operating 6 - 12 months with no internal clean down
• Minimizes routine duct cleaning by capturing and removing pollutants at the hood
• Circulated water stystem provides effective inline fire barrier
• Minimizes cost of installation as compared to other APC devices which require extended utilities, freeze protection, fire protection and support foundations
• Self-contained factory package with major components of 304SS

Restaurant Scrubber and Restaurant Scruber Hood
With increasing requirements for treating the exhaust from commercial, institutional and industrial cooking operations, businesses need access to the best available technology to solve these issues. Ecologix has developed the HITT Series Industrial Restauarant Scrubber and HITT-H Series Kitchen Air Treatment System Hood Air Treatment System. All are ETL listed.

Ecologix offers a cost-effective and lo-maintenance solution for these problems with the HITT-H Restaurant Scrubber Hood Unit. These factory Packaged systems fit into the space allocated for a standard exhaust hood and offer the customer the following benefits:

• Removes the vaporized hydrocarbons, odors and majority of smoke in the hood
• Saves on the continual expense of routine duct cleaning
• Eliminates potential fire hazards
• Creates possibility for reduction in insurance rates
• Reduces the cost of servicing roof top mounted equipment contaminated with condensed hydrocarbons from typical kitchen exhaust
• All servicing and operating requirements located in the kitchen which avoid the out-of-sight/out-of-mind problems.
• Equipment is ETL listed and readily acceptable to reviewing authorities