SkimLoop Oil Water Separator Request a QuoteSkimLoop Oil Water Separator

The SkimLoop Oil Water Separator (OWS) sets the industry standard for skimming and separating floating oils and solids from industrial fluids. It is designed as a simple, trouble-free solution for removing free floating and mechanically dispersed tramp oils from wash tanks, individual machine coolant sumps, central coolant systems, and many other manufacturing process fluids. Based on gravity flow and coalescence, the SkimLoop OWS can reduce tramp oils to less than 1% in a single pass. The SkimLoop "non-clogging" design allows for the separation of oils and sludge in two steps: First, skimming the oil at the Source Tank, followed by further separation at the OWS tank. The free oil is then collected in one Oil Collection Reservoir and water is returned back into the original Source Tank. Subject to oil loading levels, this proprietary Loop design enables a small 10gpm SkimLoop to treat upward of 100gpm or more of influent wastewater or coolant and a 20gpm unit can treat upward of 200gpm or more of influent wastewater or coolant. Applications include water soluble, semi-synthetic & synthetic coolants from machining and grinding, rolling and drawing coolants, alkaline and acidic wash waters, stamping fluids, wastewater pre-treatment, aqueous quench pits, die casting mold release fluids, and any application where separation of two immiscible fluids is required.

Key Benefits

  • Reduce new fluid purchase costs up to 75% by extending the life of those fluids
  • Reduce waste volumes by 50% - 90%
  • Separated tramp oils can be sold or recycled
  • Parts washers: Reduce cost of washwater detergent, heating & disposal costs. Delivers consistently cleaner parts
  • Coolants: Improve sump life, tooling, and part quality
  • Reduce misting & improve machine cleanliness
  • Reduce environmental waste disposal, bacteria levels, and associated odors

Unique Attributes

  • Open Channel coalescing technology is low maintenance. Frequency of cleaning is a fraction of what is required with competitive plastic media coalescers
  • Non plugging design means no worries about overflowing of the unit and spills
  • Robust and industrial grade for a lifetime of use
  • Sloped bottom for easy removal of solids and sludge
  • Quick system payback
  • Automated system for continuous operation
  • World's best floating suction skimmers — all stainless steel design and no hoses that kink, harden or collapse. Easily set and minimal adjustments
  • 304 stainless steel platepack is a lifetime purchase and easy to clean. No need to ever replace
  • Gentle flow through the system won't split weak emulsions or remove additives. Can be used with virtually any coolant or cleaner
  • System can handle temperatures up to 250 degrees and flow rates up to 10 gpm based on chemistry

Our multi-patented SkimLoop Suction skimmer is mounted in your tank solids and continuously removes the topmost oily layer. Skimmed oily fluids are pumped through the separator where floating contanimants are separated. Clean fluids return by gravity to the source tank. Inside the system there are no plastic coalescer media, filters or consumables of any kind. Our proprietary open channel platepack system separates and removes floating oils and solids purely by gravity. This makes maintenance fast and very simple. Open channels do not plug allowing the system to run continuously without problems. Oil that is captured inside the separator gravity drains automatically to a capture drum. This oil is typically dry enough to sell or recycle. No electrical panels or hook ups are normally necessary. The SkimLoop system is entirely pneumatic. It runs on plant air, typically requiring only 3 – 5 CFM. It truly is a plug-and-play system! The SkimLoop Oil Water Separator takes up very little floor space. The unit measures 48" wide x 14" deep x 24" tall. In most instances the separator can be attached to existing parts washers or other structures. We sell an optional stand that provides for easier installation. Due to the nature of the gravity discharge, our separator needs to be installed with the outlet port above the level of the fluid that it is cleaning. The standard suction skimmer that is included with our systems requires an area of 12" x 12" x 18" deep within the source tank where it will be installed. Other suction skimmers are available to deal with restricted space constrains, shallow fluid levels and large fluid level fluctuations.

SkimLoop Oil Water Separator Flow Diagram