H2Ozone 80
The H2Ozone 80 Ozone Injection System is designed to quickly integrate into an existing water line. This system produces 80 g/hr of ozone and is able to inject this ozone into water flows up to 140 GPM. This water can be used for food processing, surface disinfection or basic water treatment.
H2O 20 | H2O 30 | H2O 40 | H2O 60 | H2O 80 | H2O Skid | OCO
Features 
- Introduces 80 grams/hour ozone into up to 140 GPM water flows
- Produces ozone from integrated oxygen concentrator
- Provides 140 GPM water flows with 2.0 ppm dissolved oxygen level
- Dimensions: 36" L x 42"W x 72"H
- Customizable system can be configured for any application
- Stainless steel ASME off-gas tank
- Stainless steel pump with viton seal
- Tri-clamp connections
- Included water trap protects against water damage
| H2Ozone 80 Specifications | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Flow Rate |
Up to 140 GPM water flow (flow rates from 5-140 GPM are acceptable) |
|||||||||
Ozone Production |
80 gm/hr |
|||||||||
Oxygen Production |
20 LPM O2 @ 93% purity |
|||||||||
Capacity |
Will dissolve ozone into water at the following rates: 70 GPM with 4.0 PPM Ozone 140 GPM with 2.0 PPM Ozone Dissolved ozone levels of at least 2.0 PPM at 140 GPM |
|||||||||
Wetted Materials |
Stainless Steel, Viton seals & Kynar injector |
|||||||||
Power Required |
220V/60Hz (220V/50Hz Available) |
|||||||||
Remote Start |
System can be started remotely using provided contacts in the controller |
|||||||||
Ozone Generation Method |
Via corona discharge using dry air |
|||||||||
Maximum Operating Pressure |
50 PSI (3.5 Bar) |
|||||||||
Maximum Water Pressure |
100-PSI (7 bar) |
|||||||||
Water Connection |
2-in Tri-Clamp inlet & outlet |
|||||||||
Water Pressure Drop at 50 gpm |
less than 3 PSI |
|||||||||
Warranty |
1-year |
|||||||||
Dimensions |
36" L x 42"W x 72"H |
|||||||||
Weight |
625 lbs |
|||||||||
Optional Equipment |
||||||||||
Water Flow Switch |
Will start and stop system automatically based upon water flow |
|||||||||
Dissolve Ozone Sensor |
Monitors, displays, and controls actual ozone levels in the water |
|||||||||
ORP Monitor |
Monitors ORP level in the water, will also control dissolved ozone levels in the water |
|||||||||
Ambient Temp Sensor |
Monitors Ambient temperature to protect ozone generator and oxygen concentrator |
|||||||||
Ambient Relative Humidity Sensor |
Monitor Relative Humidity to protect the oxygen concentrator and shuts down O2 Concentrator |
|||||||||
Hour Meter |
Displays Ozone generator run time, good for determining required maintanance intervals |
|||||||||
Ozone Destruct Unit |
Will revert all excess ozone from the contact tank to oxygen |
|||||||||
Plant Compressed Air |
Use customer supplied compressed air and remove system compressor and replace with pressure regulator, and filter and offers lower power consumption and less system maintenance |
|||||||||
Remote Ozone Monitor |
Will monitor ozone in a remote location, useful when the Waterzone system will placed remotely from the point of use |
|||||||||
PROFESSIONAL ASSOCIATIONS
