Air Treatment
Water Treatment
Water Treatment
Water Treatment
Water Treatment
Sewage Treatment
Ecologix Environmental Systems Visit our online store
Return to home

Self-Cleaning Filters / Skid Mounted Jet-Disc

The Automatic Jet-Disc Skid Mounted Filter System sets the new standard for side-stream cooling tower water filtration. Available in a single-pod model as well as multiple pod models, the Jet-Disc uses a fraction of the flush water used by traditional sand filters. The Jet-Disc is effective in removing particulate (sand, sediment, etc.) as well as light airborne contaminants (cottonwood seed, algae, etc.), both of which are commonly found in cooling tower water.
Related Product Links
Automatic Jet-Disc Filters | Automatic Jet-Disc Skid Mounted | Cone Filters | Manual Jet-Disc & Jet-Screen Filters | Solid / Liquid Separator | V Series Filters | V3 Series Filters | VAF2000 Series

Benefits of the Jet-Disc System:

  • Improves Heat Transfer Resulting in a Reduction in Energy Costs.
  • Cuts Maintenance Costs Dramatically By Decreasing Downtime for Cleaning and Repair
  • Complements Chemical Treatment Program Therefore Reduces the Cost of Water Treatment
  • Increases Lifespan of Downstream Equipment Such As Heat Exchangers, Process Equipment, ETC

Complete Systems Include
  • Automatic Filters/Disc Cartridges
  • Stainless Steel Inlet/Outlet Manifolds
  • Automatic Backflush Valves/Solenoids
  • MAXIM Backwash Controller
  • Stainless Steel Leg Assembly
  • Pump & Motor Starter Relay
  • Pressure-Sustaining Valve (on multiple pod systems only)
  • Skid Assembly (stainless steel or plastic)
  • Air-Override Feature (air enhances backflush efficiency)
 Optional Features
  • Isolation Valves
  • Pump Pre-Strainer (with perforated screen)
  • Air Compressor (if compressed air is not available)

Flow Rates for a Single Automatic Filter Pod*:

  • 2"/70-GPM Max. Per Filter Pod
  • 3"/100-GPM Max. Per Filter Pod

*Multiple pods are manifolded for higher flow rates.
*Flow rates vary greatly depending on water quality, solids loading, and the micron size.		 Micron Sizes Available*:
  • 200 MICRON (l50-mesh)
  • 130 MICRON (l20-mesh)
  • 100 MICRON (80-mesh)
  • 50 MICRON (270-mesh)
  • 20 Micron (700 Mesh)
*Centrifugal spinning action increases micron efficiency.
Results vary depending on specific

Specs & Dimensions:
Flow Ranges
20-70 gpm
70-150 gpm
150-210 gpm
210-300 gpm
300-400 gpm
400-500 gpm
500-600 gpm
750-800 gpm
800-1000 gpm
1000-1400 gpm
Mesh / Micron Data

Materials of Construction:
  • Filter Housing: Polyamide
  • Filter Discs: Polypropylene or K-Resin
  • Inlet/Outlet Manifolds & Filter Leg Assembly: Type 304 Stainless Steel
  • Backwash Valves: Bronze or Cast Iron Epoxy Coated
  • Solenoids: Brass/Stainless Steel or Plastic (12vdc or 24vdc)
  • Pressure-Sustaining Valve: Cast Iron Epoxy Coated (multiple pod systems only)
  • Skid Assembly: Type 304 Stainless Steel or Plastic
  • Backwash Controller: 120VAC
  • Backflush Enhancing Air-Override Feature: 1/4" NPT Air Connection for Compressed Air

*Compressor is optional if compressed air is not available

Backwash Controller Options:

  • Pressure Differential
  • Elapsed Time
  • Manual Override