IBR

Cone Filters

Cone Filters are used to catch and filter any type of debris from the waste stream. A variety of mesh screens are available to remove small micron sized particulate as well as larger 1/4 inch sized particles. The cone filter has been highly successful in a great number of applications such as pumping from wells and sump pumps that contain solids of any type.






Cone | SpinKlin 4 | SpinKlin 6 | Preliminary

System Overview

Cone Filter

Cone Filter Technology contains a stainless steel screen filter that is designed for the removal of sand and sediment from well water for the irrigation and liquid fertilizer industry. Our unique filter has grown popular due to its low maintenance design, stainless steel construction, space saving profile, and exceptionally low pressure loss.

All models of the Cone Filter series will operate with less than a 1-PSI pressure loss at maximum flow when clean. This efficiency provides real energy savings when compared to filter products that rely on energy consuming devices like spinners and torpedoes to give a comparable cleaning action. Call us today for a free energy savings estimation.

Choosing a filter with sufficient surface area is critical in any application. The Cone Filter series has significantly more surface area than most traditional basket and y-strainers. Ecologix has a filter that will fit your specific needs with units available from 2" to 10" and flow rates up to 2,000 GPM (higher flow rates are achieved by manifolding multiple filters). Our screen mesh options are available from 16 to 250 mesh.

Features

  • 304 SS Construction
  • 2" & 3" models use a 304 SS riser pipe
  • 4"-10" models use PVC elbow and riser pipe assembly

Gaskets:

  • EPDM is standard, other compounds available
  • Includes - lid gasket, disk and filter gasket
  • Bolt, washer and nut - grade 5 mp Assembly
  • Clamp and handle - 304 SS
  • Standard 1/4" FNPT 304 SS inlet and outlet gauge ports
Cone Filter Specifications
Model
Max gpm
 Screen Surface Area Inlet/Outlet Style Flush Port Connection Lid Type Max. Pressure Rating
CF-2
100
 122 sq. in. 2" Male NPT 1.5" Male NPT Clamp 125-PSI
CF-3
200
 200 sq. in. 3" Male NPT 1.5" Male NPT Clamp 125-PSI
CF-4C
350
 367 sq. in. 4" Flanged 1.5" Male NPT Clamp 125-PSI
CF-4B
350
 367 sq. in. 4" Flanged 1.5" Male NPT Bolt 150-PSI
CF-6
750
 745 sq. in. 6" Flanged 1.5" Male NPT Bolt 150-PSI
CF-8
1300
 1559 sq. in. 8" Flanged 1.5" Male NPT Bolt 150-PSI
CF-10
2000
 2434 sq. in. 10" Flanged 1.5" Male NPT Bolt 150-PSI



Pressure Differential Alarm Package (PDA)

To enhance our Cone Filter line of unique strainers; Ecologix has an Instrumentation Package that will monitor your differential pressure and will automatically backflush your strainer over a period of time.

The Pressure Differential Alarm Package (PDA) continously monitors the inlet and outlet system pressure. When the filter screen becomes dirty, a switch-gauge triggers an aubible siren and visual flashing alarm. These alarms are intended to alert maintenance personnel that the strainer screen needs to be removed from the strainer housing for manual cleaning.

The Automatic Timer Flush Package (ATF-EA-1.5) insures that the particulate that falls down to the debris reservoir is automatically flushed. The power supply and timer controls for the valve package are housed inside the watertight control box, attached to the valve. Depending on the application, the end-user simply dials in the flush frequency and flush duration of the valve. Based on the parameters that are programmed, the ball valve quickly opens and closes, minimizing the volume of water that is flushed from the strainer. The valve also comes with a manual flush control switch that can be used to conveniently manually flush the strainer or drain the strainer before removing the screen.

Cone Filter Series Instumentation & Housing (all models)

  • T304 Stainless Steel
  • T316 Stainless Steel Available By Special Orderts
  • Screen Frames: T304 Stainless Steel
  • Screen Mesh: T316 Stainless Steel
  • Perforated Sheet Metal: T304 Stainless SteelPiping:
  • 2” and 3” Models Use a Type 304 Stainless Steel Riser Pipe
  • 4” Through 10” Models Use a PVC Elbow and Riser Pipe Assembly
  • CPVC is Available By Special Order
  • Stainless Steel is Also Available By Special Order
Gaskets:
  • EPDM is Standard, Other Compounds Are Available By Special Order
  • Gaskets Include: Lid Gasket, Disk Gasket and Filter Gasket (bottom gasket)
  • Bolt, Washer and Nut: Grade 5 mp Assembly (clamped lid models only)
  • Clamp and Handle: T304 Stainless Steel
  • 1/4” FNPT T304 Stainless Steel Inlet & Outlet Gauge Ports Are Standard (gauges not included)